Visit Homepage
Press "Enter" to skip to content

Tag: OpenVibe

OpenVibe – Part 3

Published January 4, 2015 by katie356

Note, see OpenVibe – Part 1 and OpenVibe – Part 2

Now a walk-through (Part 3 of 3) of using your Mindwave and OpenVibe to save a sample of your brainwaves to a file.

Start “openvibe designer”, then open your “acquisition-signal-display.xml” and your “acquisition-file-csv.xml”

Capture1

Start Neurosky’s “Thinkgear Connector”, and make sure the “Starting port” is correct.

Capture4

Start “openvibe acquisition server”, and choose a driver “Neurosky Mindset”

Capture2

Click on “Driver Properties”, and make sure the “COM Port” is correct” and you’ll want a “Sampling frequency” of 512.

Capture3

Click on “Connect”, then once it is connected, click on “Play”.

Capture4

Continue readingOpenVibe – Part 3
13 Comments

OpenVibe – Part 2

Published November 26, 2014 by katie356

Note, here is  OpenVibe – Part 1

This next part is about creating two boxes (processing algorithms), one to view your live brainwaves, and one to save the brainwave readings to a file (to be used for later analysis).

Box 1 – Signal Display

The first step is to start the OpenVibe Designer, and open the “generic-stream-reader.xml” (if you are not sure how, see OpenVibe – Part 1).

Create an OpenVibe folder C:OpenVibe

Next Save the “generic-stream-reader.xml” as “acquisition-signal-display.xml” in the C:OpenVibe folder.

OpenVibe11

On the right-hand side of the OpenVibe Designer are the components of the processing algorithms.

Continue readingOpenVibe – Part 2
2 Comments